2000A electrolytic degreasing power supply

Basic Information
Place of Origin: China
Brand Name: xingtongli
Certification: ISO CE RoHS
Model Number: GKD15-2000CVC
Minimum Order Quantity: 1 unit
Price: 1200~1600$
Packaging Details: Single wooden case packing size: 715*485*860mm Weight:85kg
Delivery Time: 5~7 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 150units/month
Product Name: 2000A Electrolytic Degreasing Power Supply Input Voltage: AC 415V
Phase: 3 Phase Output Voltage: DC 0~15v Adjustable
Output Current: DC 0~2000A Adjustable Work Mode: CC CV
Size: 715*485*860mm Weight: 85KG
Color: Black

2000A electrolytic degreasing power supply

 

Specification

 

SPECIFICATIONS FOR GKD15-2000CVC

Input AC 380V±10% 3phase 50/60Hz
Output DC Volt 0~15V Adjustable
Current 0~2000A Adjustable
Power 30KW
Efficiency >85%
output Frequency 40KHz fixed
Protection Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection
Working Condition
(Temperature)
-10℃~50℃ Control mode Panel control
Remote control
Net weight 70kg Working mode Constant Voltage(CV)
Constant Current(CC)
Dimension(mm)

715*485*860

mm

Cooling way air cooling

 

Features

Electro plating power supply provide power supply to a variety of plating bath. Plating can be divided into direct current plating, cycle pole reverse plating, and pulse electroplating etc.. Early plating power supply used by AC motors – DC generator units, since the 1980s has gradually been replaced of power electronic devices composed plating power supply.

 

2000A electrolytic degreasing power supply 0

2000A electrolytic degreasing power supply 1

2000A electrolytic degreasing power supply 2

 

AC to DC plating rectifier application:

2000A electrolytic degreasing power supply 3
 

How to install rectifier
This is installation way for remote control rectifier. Not only this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power supply/rectifier
4. We advice that all rectifiers should be isolated to increase of its life.
2000A electrolytic degreasing power supply 4

 

Electroplating technology

As electronic components become increasingly smaller, the use of electroplating to manufacture the components and interconnects between these devices has become significantly more important. Historically, a simple powerstat was used to control the rectifier output.

As the power requirements changed and the plating requirements continued to be more sophisticated, electroplaters started to specify outputs with a ripple of less than 5%, so chokes and capacitors were used to smooth the output. Now switching power supplies are becoming the industry standard because of their small footprint, good regulation, and low ripple.

Plating is essentially a molecule-by-molecule process where soluble metal ions dissolved in water pick up electrons from the rectifier at the cathode. The electrons convert the metal ions back into the solid metal. For the metal ions to be reduced to the metal, the predominant flow of electrons has to be into the workpiece, which is at the cathode.

A power supply used for plating is considered a dc supply as long as more electrons flow into the piece being plated than are removed from it. If more electrons are removed from the workpiece than flow into it, the workpiece either dissolves or anodizes depending on the type of metal.

Contact Details