24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating

Basic Information
Place of Origin: China
Brand Name: xingtongli
Certification: ISO CE
Model Number: GKD24-2000CVC
Minimum Order Quantity: 1 unit
Price: Negotiable
Packaging Details: Single wooden case packing size:780*610*580mm Weight:100kg
Delivery Time: 10~18 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 150 units/month
Color: Gray Input Voltage: 220v
Phase: 3 Phase Output Voltage: DC 0~24V Adjustable
Output Current: DC 0~2000A Adjustable Size: 820*780*940mm
Weight: 200kg Control: Remote Control With 6 Meter Control Wire
Cooling: Air Cooling Application: Copper Electroplating
High Light:

plating power supply

,

dc rectifier for electroplating

 

 

high frequency 24v igbt variable dc power supply for copper ,zinc electroplating features:

 

 

  1. Small size, light weight electroplating power supply: SCR rectifier size and weight only 1/5-1/10, very convenient for you to plan, expand, move, maintenance and installation.
  2. Energy-saving effect: as the electroplating power supply USES high-frequency switching transformer, the conversion efficiency is greatly improved. Generally speaking, the efficiency can be improved by more than 10% compared with the SCR rectifier equipment, and the efficiency can be improved by 30% or more if the load rate is less than 70% compared with the SCR.
  3. High frequency switching power supply AC to DC rectifier adopts air cooling/water cooling design, easy to install. With remote control device, simple operation. Can switch off the machine when loading, reduce cumbersome procedures of adjustment.

Electroplating power supply Specification and parameter

input voltage 220v 3 phase 50/60hz
Output voltage 0~24v adjustable
Voltage stability 0~2000a adjustable
Current stability ≤1%
Ripple factor 1%-2%
efficiency ≥90%
weight 200kg
dimension 820*780*940mm
Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
Adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
Cooling system Air cooling
Control method local control/remote control/plc control
Display contents Voltage meter/Current meter/Working/Over temp/Error,
Protection method Input over-voltage/Under-voltage/Over current/Output short/Over heating self protection etc..
Operating temperature -20-50℃
Ambient temperature -30-65℃
Ambient humidity ≤90%

24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating 0

24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating 1

24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating 2

 

 

24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating 3

Cabinet:

high frequency water cooled zinc plating igbt power supply 18v 3000a cabinet adopts magnetic cut links, reduce eddy current losses, and cabinet as a whole spray painting

Structure:

Reasonable structure design, isolated the inverter part and , rectification part , convenient to disassemble and maintenance

Radiator:

radiator capacity expanded 1.5 times,make sure better cooling effect

switch control way:

adopt full bridge phase shifting soft switch,reduct IGBT loss,save engergy

Main transfadopts

high frequency water cooled zinc plating igbt power supply 18v 3000a amorphous core,increase transformer efficiency,reduct the transformer temperature rise,cut the rectifier weight,improve the power supply stability, reliability

Core & Schottky diode:

core capacity expanded 1.5 times

schottky diode expands 4 times

 

Board :

high frequency water cooled zinc plating igbt power supply 18v 3000a all control boards did anticorrosion treatment with imported three defense lacquer

IGBT:

3high frequency water cooled zinc plating igbt power supply 18v 3000a IGBT capacity expanded 3 times,make the power supply more reliable

24 v Igbt Variable Dc 3 Phase Power Supply For Copper / Zinc Electroplating 4

1, Placing rectifier and keep the body stability; ensure good ventilation.
2, Checking anodizing rectifier out cover if loosing.
3, Connecting shell to ground to prevent static electricity.
4, Conecting the AC input wire
5, Connecting the DC output copper bars
6, Connecting the rectifier remote control box,if local control ,skip this step
7, Turn on air switch, then the fan starts to rotate and the power indicator light.
8, Clockwise rotation adjustment button, voltmeter degree increases, working indicate light lighting.
9, Adjust knob to maximum, then the voltmeter should indicate the rated voltage, current meter indicates the load volume accordingly.
10, Disconnect the air switch, turn off the  rectifier

 

Contact Details