Air Cooling Electroplating Power Supply 2500A 12V

Basic Information
Place of Origin: China
Brand Name: xingtongli
Certification: ISO CE RoHS
Model Number: GKD12-2500CVC
Minimum Order Quantity: 1 unit
Price: 1200~1600$
Packaging Details: Single wooden case packing size: 715*485*860mm Weight:85kg
Delivery Time: 5~7 work days
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 150units/month
Product Name: UK Hot Sale 2500A 12V Air Cooling Electroplating Power Supply Input Voltage: AC 415V
Phase: 3 Phase Output Voltage: DC 0~12v Adjustable
Output Current: DC 0~2500A Adjustable Work Mode: CC CV
Size: 93*86*61cm Weight: 105KG
Color: Black
High Light:

Air Cooling Electroplating Power Supply

,

2500A Electroplating Power Supply

,

Dc Power Supply For Electroplating

UK hot sale 2500A 12V air cooling electroplating power supply

 

Specification

 

SPECIFICATIONS FOR GKD12-2500CVC

Input AC 380V±10% 3phase 50/60Hz
Output DC Volt 0~12V Adjustable
Current 0~2500A Adjustable
Power 30KW
Efficiency >85%
output Frequency 40KHz fixed
Protection Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection
Working Condition
(Temperature)
-10℃~50℃ Control mode Panel control
Remote control
Net weight 105kg Working mode Constant Voltage(CV)
Constant Current(CC)
Dimension(mm)

93*86*61cmmm

Cooling way air cooling

 

Features

Electro plating power supply provide power supply to a variety of plating bath. Plating can be divided into direct current plating, cycle pole reverse plating, and pulse electroplating etc.. Early plating power supply used by AC motors – DC generator units, since the 1980s has gradually been replaced of power electronic devices composed plating power supply.

Air Cooling Electroplating Power Supply 2500A 12V 0

Air Cooling Electroplating Power Supply 2500A 12V 1

Air Cooling Electroplating Power Supply 2500A 12V 2

 

AC to DC plating rectifier application:

Air Cooling Electroplating Power Supply 2500A 12V 3
 

How to install rectifier
This is installation way for remote control rectifier. Not only this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power supply/rectifier
4. We advice that all rectifiers should be isolated to increase of its life.
Air Cooling Electroplating Power Supply 2500A 12V 4

 

Electroplating technology

As electronic components become increasingly smaller, the use of electroplating to manufacture the components and interconnects between these devices has become significantly more important. Historically, a simple powerstat was used to control the rectifier output.

As the power requirements changed and the plating requirements continued to be more sophisticated, electroplaters started to specify outputs with a ripple of less than 5%, so chokes and capacitors were used to smooth the output. Now switching power supplies are becoming the industry standard because of their small footprint, good regulation, and low ripple.

Plating is essentially a molecule-by-molecule process where soluble metal ions dissolved in water pick up electrons from the rectifier at the cathode. The electrons convert the metal ions back into the solid metal. For the metal ions to be reduced to the metal, the predominant flow of electrons has to be into the workpiece, which is at the cathode.

A power supply used for plating is considered a dc supply as long as more electrons flow into the piece being plated than are removed from it. If more electrons are removed from the workpiece than flow into it, the workpiece either dissolves or anodizes depending on the type of metal.

Contact Details