|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||Single wooden case packing size:750*560*780mm Weight:114kg|
|Delivery Time:||10~15 work days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Product Name:||Cabinet Type AC/DC Electroplating Rectifiers 15V 5000A With Polarity Reverse||Input Voltage:||AC 415V|
|Phase:||3 Phase||Output Voltage:||DC 0~15v Adjustable|
|Output Current:||DC 0~5000A Adjustable||Work Mode:||CC CV|
15V 5000A plating rectifier,
pulse rectifier electroplating
Suitable for sewage treatment production line.
The core components of the commutation are made of special superconducting materials, the control part adopts intelligent time control, the power is turned off during switching, and it has protection functions such as undervoltage, phase loss, overcurrent and short circuit.
According to customer needs, it can expand standard control interfaces such as 4-20mA, 0-10V, 0-5V, etc. It can also meet the requirements of RS485 communication interface with the host computer, RS232 and other control systems.
Input voltage: three-phase AC380V±15%
Output current: 500-40000A optional
Output voltage: 12V 18V 36V optional
Output current: 0-limit current value (steplessly adjustable)
Output voltage: 0-limit voltage value (steplessly adjustable)
Control mode: PMW pulse width control
Cooling method: forced air cooling
Control accuracy: rated value ≤1%
Operation mode: operation under different states of voltage stabilization/steady current
|SPECIFICATIONS FOR GKD15-5000CVC|
|Output DC||Volt||0~500V Adjustable|
|output Frequency||40KHz fixed|
|reverse||reverse time||0~999hours optional|
|Protection||Short circuit protection
Phase lack protection
Input over/low voltage protection
|-10℃~50℃||Control mode||Panel control
|Net weight||280kg||Working mode||Constant Voltage(CV)
|Dimension(mm)||1020*1000*1270m||Cooling way||water cooling|
Using timing control function, the setting is simple and convenient, and the working time of positive and negative current polarity can be arbitrarily set according to the plating process requirements.
It has three working states of automatic cycle commutation, positive and negative, and reverse, and can automatically change the polarity of the output current.
How to install rectifier
This is installation way for remote control rectifier. Not only this way.
1. To connect copper bar with bath/tank
2. To ensure power supply/rectifier is grounded
3. To ensure there is enough water for water cooling type power supply/rectifier
4. We advice that all rectifiers should be isolated to increase of its life.
a: Adopting completely digitalized machining
b: Adopting cold rolled production of iron steel sheet, after phosphorization, zinc plating, plastic spray, the rectifier gets better structural strength and anti-corrosion.
c: Reasonable structure design, isolated inverter design, rectification part is convenient to disassemble and mend because of its neat assembling.
d: Radiator gets better cooling effect because of its 1.5 times capacity.
2 Electric control system
a: The rectifier adopts full bridge phase-shifted soft switch control, ensuring the lowest power loss of IGBT. The capacity of IGBT become 3 times bigger.
b: The main transformer. It adopts amorphous core to increase transformer efficiency and cool transformer, and not only can lighten rectifier weight, but also can strengthen rectifier stability and reliability. At its elementary stage, it adopts series blocking capacitor.
c: Magnetic deviation automatic correction circuit is adopted and the total power of magnetic core gets enlarged 1.5 times.
3 Schottky Barrier Diode
a: It has been expanded 4 times.
4 All the controlling boards get antiseptic treatment with imported lacquer.